Why do people say that it’s good to keep clean your vehicle? It is very necessary to clean a car from outside and inside because it is very important for a car owner. Regular maintenance not only benefits you but it will keep your car is running and working conditions for many years.
If you use your car regularly then it is very rare that your car gets corrosion either on engine or battery. If you have a car that is not in a running state and is in your garage for so many years then it is very important to check it regularly for corrosion.
Corrosion can totally damage your battery because it can be formed on and inside the battery. It can be formed in the terminals of the battery and around the battery terminals. It forms very quickly when your car is not in running state. So, regularly check your car if it is not in a running state so that you can improve your battery life by clearing it on regular basis.
There are many things that need to be done when your car is in your garage for so many months. People think that a car that is not in working condition will not take time while it is not the case. A car in the garage takes the same time that a car in running position takes. So keep checking your car for protecting it from strong corrosion that will damage your car.
What Corrosion Actually is?
It is a substance that forms because of a chemical reaction between a battery terminal and battery cables. It totally affects battery that battery cannot even provide power to the car’s part.
What if your car gets corrosion on the battery? Obviously, no one knows how to clean corrosion. Here are three important steps that can be used to remove corrosion and clean your car’s battery.
Remover Battery Terminals
First of all, remove the positive and negative ends of the battery terminals so that you can clean them properly. You should wear goggles, gloves for safety. You should have a battery wrench to open the terminals. Let you open the negative terminal first and then positive terminal during the process. Use a wrench to open cable nuts.
Be careful while connecting and disconnecting terminals because the battery has acid inside that causes heavy damage. So be careful while opening terminals.
Clean the Battery
After removing the battery from the car, it’s time to clean it. If you are thinking that for cleaning a battery, you need many expensive things then be relax because you only need some common things to clean a battery. These all the things that will help you to clean a battery will be available at your home. Here are the things that you need to clean a battery.
- Petroleum jelly
- Baking soda
- A wire brush
These three helpers will clean the corrosion from your car’s battery. Now how will you use all these things? First of all, you need to neutralize the battery terminal. For neutralizing, sprinkle some amount of baking soda around the battery terminal where corrosion occurs.
Sprinkle baking soda on all the affected areas as well. The reaction between water, baking soda and the corrosion on the terminals will neutralize the battery terminals. Now it is safe for you to handle the battery.
Now it’s time for cable ends to clean corrosion. Apply the same procedure at the end of the cables of the battery.
Use a brush to clean all the corrosion from the battery terminals and cable ends. After removing corrosion, rinse it with clean water. Now it’s time to dry terminals and cable ends of the battery. Now apply some amount of petroleum jelly on battery terminals and end of the cable that will produce electricity between the terminals and the cable ends.
Reconnect the Battery
It’s time to reconnect the battery terminals and battery cables. All you need to have a battery wrench that will help you with the whole process. Connect the positive end first and then negative terminal.
This is the whole process that you need to follow for cleaning corrosion from the battery. This blog will help you to save your battery from corrosion.
You can also contact: Melbourne Car Removals
Get your car remove today: Metro Car Removals